Search...

Search
Electric Hydraulic power pack header Electric Hydraulic power pack in action

Electric Hydraulic Power Units

Dieseko Group offers zero-emission Electric Hydraulic Power Units built with IE and with Permanent Magnet Motors. Due to their high efficiency, the absence of emissions, the low noise and the saving of energy, electric motors makes a big difference compared to combustion engines. PM-motors are the most powerful and efficient type of electric motors compared to e.g. induction motors.
Dieseko Group offers zero-emission Electric Hydraulic Power Units built with IE and with Permanent Magnet Motors. Due to their high efficiency, the absence of emissions, the low noise and the saving of energy, electric motors makes a big difference compared to combustion engines. PM-motors are the most powerful and efficient type of electric motors compared to e.g. induction motors.

Dieseko Group offers zero-emission Electric Hydraulic Power Units for building sites with most stringent emission regulations

We built these Power Units with IE and with Permanent Magnet Motors. Due to their high efficiency, the absence of emissions, the low noise and the saving of energy, electric motors makes a big difference compared to combustion engines.

PERMANENT MAGNET MOTORS

PM-motors are very compact, deliver higher torque and the engine can react faster to speed or load changes. Perhaps the greatest benefit is the fact that they are up to 5% more efficient than comparable induction motors. An additional benefit is that the operational costs are much lower, due to the lack of an internal combustion engine with all its components and maintenance and service costs.

Dieseko Group sees many benefits in using this technology and is making use of all its acquired knowledge to develop a completely new generation of Electric Hydraulic Power Units.

Related topics:

Electric Hydraulic power pack
Electric Hydraulic power pack
Electric Hydraulic power pack
Electric Hydraulic power pack
PM-HPP motor
Electric Hydraulic power pack pump

Complete range of modular, full-option electric-hydraulic power units according to high Dieseko Standard

 

  • Suitable for wide range of hydraulic tools; vibratory hammers, impact hammers, rotary heads, dredge pumps, etc.
  • Accurate hydraulic power control (flow and pressure) by adjustable piston pumps.
  • Low hydraulic losses due to optimized hydraulic design & components.
  • Bypass oil-filtration for longer usage life of oil and components.
  • Grid connection, battery connection or combined with standardized Power-locks, standard power supply: 400 V AC, 50 Hz & 440 V AC, 60 Hz. No power-peaks due to soft-starters and sequenced start-up

EHPU: future proof

 

    • Zero emission, fully electric-hydraulic
    • Low noise levels
    • High energy efficiency asynchronous motors IE3 (96%), air cooled
    • Additional energy saving due to electrical design containing different motors for dedicated functions & motors only running when in use (no idle mode)

Easy to use

  • Turn key startup after unloading & connecting.
  • Online monitoring & service, minimized maintenance intervals due high reliable electric motors, less spare parts and lack of combustion engine

PVE 700e EHPU (Electric Hydraulic Power Unit)

  • 430kW, 600L/320bar Power Unit
  • Suitable for wide range of vibratory hammers, impact hammer, rotary heads, dredging pumps
  • Grid connection, battery connection or combined, with standardized Powerlocks
  • CMS & DriveLink remote services
Specifications
Electric motors
IE3 with soft starters
Emission
0
%
Max. power @ 50 Hz
430
kW
Max. frequency
1480
rpm
Service communication
DriveLink
Main pump
variable oil flow
Max. oil flow @ 0 bar
798
L/min
Max. oil flow @ 100 bar
762
L/min
Max. oil flow @ 320 bar
650
L/min
Max. operating pressure
350
bar
Hydraulic system
open
Hydraulic oil capacity
1400
L
Weight gross
9200
kg

More information about the Electric Hydraulic Power Packs

Download the leaflet

For more information, please contact Department Sales Benelux in Sliedrecht.

Martijn Schols - Dieseko Group

Martijn Schols

Director Sales International, Russia, Eastern Europe

+31 (0)6 21 30 58 31

Email me

Jolanda van den Brink

Director Sales Benelux, Italy, France - OEM projects - Rental

+31 (0)6 22 45 82 27

Email me